Fender Eliminator/Vent mounted Indicators

[X27]

So, has anyone done the fender eliminator with the indicators in the vent (The limited edition one). I'm concerned with the legality of it here in Aus. I'm not phazed on the relocation of the plate as its visable from a 45. angle, the indicators however look totaly sus.....i dont think a cop would be too happy about that, arnt they suppose to be visable side on as well as fore and aft???????

[0071098]

I have recently mounted them, sorry no pics right now. they are high quality and look great. although you may not see the indicator itself directly, when it blinks at night, the entire rear side of the bike blinks, it looks good. not sure how bright it is at day still havent seen it yet, working too much... not sure about the legal issues in Aus..

[Roadrunner]

I made my own - cost about $15.00 U.S. But here, at least in this state, m/c aren't required by law to have turn signals.

Mounted some large round LED's in the rear vents and made a bracket out of 1/8" aluminum bar stock.

http://ASphoto.smugmug.com/photos/288291366_CSBpY-M.jpg


http://ASphoto.smugmug.com/photos/288291238_RFJg9-M.jpg

[KNEEDRAGGER]

We have 3 left unsold that are coming in next week, and at the forum member price they are only 135$ plus actual shipping.

http://bellissimoto.com/Fendereliminators.html

[KNEEDRAGGER]

I made my own - cost about $15.00 U.S. But here, at least in this state, m/c aren't required by law to have turn signals.

Mounted some large round LED's in the rear vents and made a bracket out of 1/8" aluminum bar stock.

http://ASphoto.smugmug.com/photos/288291366_CSBpY-M.jpg


http://ASphoto.smugmug.com/photos/288291238_RFJg9-M.jpg


Ohh and nice garage, but you may want to have those walls inspected they seem to have just a slight bow in them... :mock

[ozducati]

X27, i have the Competition Werkes kit, with the plate at the rear, and the indicators in the vents, they are plenty visible and bright enough, doubt you wuld have any issues....

[AntK]

Hey there guys.... my local dealer at Artarmon in Sydney has said that to install the vent mounted indicators, you need a bracket built to hold them in the underseat section. As for legalities on these, apparently, the only pre-requisite is that your indicators are meant to be 300mm apart (as i got a defect notice on my 748 for having integrated rear brakes and indicators - and he was a prick of a copper!).

OZDUCATI - did you build a bracket or mount to existing subframe??

Cheers boys!

[ozducati]

Hi Guys, the brackets all come in the Competition Werkes kit, everyhting you need to do it is in the box..

[Duc1098S]

X27, i have the Competition Werkes kit, with the plate at the rear, and the indicators in the vents, they are plenty visible and bright enough, doubt you wuld have any issues....

+1

Very happy with it too

[Thugsfatboy]

I have just fitted these in the vents and they are brighter than the LED's built into the CA integrated taillight swapped lenses out of the CA onto the factory LED's after the CA shat itself as i wanted the smoke lens

[AntK]

OK Lads - just spoke with Shawn at Competition Werkes and he said he would do the indocators on their own for about $35US plaus shipping!

SWEEEEEEEEEEEEEEEEEEEEEET :thumbup

Mine should get here next week!

They come with the indicators and the brackets to mount as well!

Cheers,

Ant

[Duc1098S]

Here's a few pics of mine installed.

I need to get the vents from frasers as they fell off ages ago.

[10ninety8]

Here's a few pics of mine installed.

I need to get the vents from frasers as they fell off ages ago.

what was the price for the complete kit delivered?
what do you think of it?
are the indicators led,s? and if so do they have a new flasher to correct flashing speed?
sorry for all the questions lol

thanks man

[Duc1098S]

all up delivered was about 150usd. which was about 170aud at the time.

Very happy, good quality and the indicators fine. I still have to get the vents put be into the rear tail as they fell off way before I put the indicators in.

[ducmon]

If you're worried about the legalities just make sure you keep all the original equipment, if you get pulled for the mod change it back, take it over the pits, then change it back again after it passes.

[Beefa]

If you're worried about the legalities just make sure you keep all the original equipment, if you get pulled for the mod change it back, take it over the pits, then change it back again after it passes.


Just be careful that the copper who sends you to the pits doesn't take a pic of the mod, then sends that on to the inspection station with his other paperwork !!

[Beefa]

Here's a few pics of mine installed.

I need to get the vents from frasers as they fell off ages ago.


Duc, that rear end looks sweet - where'd you get that rear hugger ? How much ? Is it a special one for that Termi system ? How many more questions can I ask ? :eek

[AntK]

So i think that if you are worried about YOUR kit, can you imagine what I must be thinking then???

At least, yours in visible from 45 degree angle!!

Good luck X

[X27]

Looks good bro....hows the tyre to plate clearence.

[Humpo]

If your lucky he will book you for the indicators not the sub light speed you were doing.

[AntK]

so far NO DRAMAS with clearance and we did hit a couple of 'ball rattling' pot holes last week!!